BS EN 15037-1
BS EN 15037-1:2008 ‘Precast concrete products. Beam-and-block floor systems. Beams’ is a British-adopted European Standard which came into force in 2008.
It provides requirements, test methods and evaluation of conformity for precast beams using reinforced or prestressed normal or lightweight concrete intended for use in structural floor and roof systems.
It refers to concrete beams which provide the final strength of the floor system, independently of any other component part of the system. It also refers to semi- or resisting concrete blocks that transfer the floor load onto the self-bearing beams. The final strength of the floor is achieved in conjunction with a concrete topping and can also be with concrete blocks.
It is published is published in parts 1 to 5:
- Part 1 - Beams
- Part 2 - Concrete Blocks
- Part 3 - Clay Blocks
- Part 4 - Expanded Polystyrene Blocks
- Part 5 - Lightweight Blocks for simple formwork
In addition to the beam and block/infill specification, consideration must also be given to the floor finish. This will largely be dependent on the type of substrate, the beam and infill system used and whether that system is deemed to be self-bearing or non-self-bearing.
The standard states that it is essential that the beam’s total depth is between 60-300 mm and beams are placed at centres of no more than 1 m. Precast concrete beams of higher depth should comply with EN 13225.
[edit] Find out more
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from constructuon and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.
The increasing costs of repair and remediation
Highlighted by regulator of social housing, as acceleration plan continues.
Free topic guide on mould in buildings
The new TG 26/2024 published by BSRIA.
Greater control for LAs over private rental selective licensing
A brief explanation of changes with the NRLA response.
Practice costs for architectural technologists
Salary standards and working out what you’re worth.
The Health and Safety Executive at 50
And over 200 years of Operational Safety and Health.
Thermal imaging surveys a brief intro
Thermal Imaging of Buildings; a pocket guide BG 72/2017.
Internally insulating a historical building
An experimental DIY approach using mineral thermal lime plaster.
Tree species selection for green infrastructure: A guide for specifiers.
The future of the Grenfell Tower site
Principles, promises, recommendations and a decision expected in February 2025.